VINCENT SA-T7 Instructions For Use Manual page 31

CONNECTION OF SOURCE DEVICES OVER
The integrated D/A converter makes it possible to receive also digital audio signals via an optical and/or
coaxial cable and to transmit them analogously to the amplifier. Here, the "Optical IN" and "Coaxial
IN" (13) connections serve as input.
Digital audio source with optical signal connection
SA-T7
Digital audio source with coaxial signal connection
SA-T7
CONNECTION OF A RECORDING DEVICE
If you want, you can use the RCA sockets "OUTPUT REC" (12) on the back of the appliance to connect an
analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is
intended for receiving the unchanged, fixed stereo output level (line level) from the signal source selected
on the amplifier at any given time. The output level is independent from the volume setting. Please note that
while the preamplifier is muted (10) the recording output is switched off.
SA-T7
Connect this signal output to the signal input ("LINE IN", "TAPE IN" or "REC IN") on the recording appli-
ance using RCA cables. Please note that some recording equipment can have a slightly detrimental effect
on the audio signal quality. Some recording devices have rather low input impedance, which can slight-
ly alter the input signal voltage. For maximal music enjoyment we recommend that you connect to the
"REC" terminal only for as long as the recording is actually being made.
OPTICAL IN AND COAXIAL IN
Optical digital cable
Coaxial Digital cable (RCA)
RCA connection
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT
DVD, SACD, CD,
TV/Radioreceiver
DIGITAL OUT
Recording device,
e.g. tape recorder
LINE IN
Vincent
31