How To Select The Temperature Units Of Measure; The Reset Button; Low Battery Signal Indication; Free Standing Or Wall Mounting - Oregon Scientific BA113 User Manual

HOW TO SELECT THE TEMPERATURE
UNITS OF MEASURE
°
" C"
POSITION
°
READING IN " C"
The switch on the back of the Barometer selects between
degrees Celsius and Fahrenheit. To select Celsius units,
set the switch to °C. To select Fahrenheit units, set the
switch to °F.

THE RESET BUTTON

If the unit does not operate properly, use a pointed object
to push the [RESET] button once, which is located on the
back of the unit.

LOW BATTERY SIGNAL INDICATION

If the voltage of the batteries becomes low, the 'BATT'
indicator will be displayed. Please replace the batteries
when the 'BATT' indicator is displayed.
°
" F"
POSITION
°
READING IN " F"

FREE STANDING OR WALL MOUNTING

STAND

Your Barometer comes with a built-in stand for tabletop
use. On the back of the unit, ease the plastic stand in the
recess holes on located on the bottom of the case.
1. PUSH DOWN
GENTLY
3. PLACE THE STAND
8
2. PULL ALWAYS
FROM UNIT