Activate Alarm; Silence Alarm; Temperature And Humidity; Select Temperature Unit - Oregon Scientific RMR616HGA User Manual

ACTIVATE ALARM

Press ALARM to switch to Weekday or Single Alarm
view. To activate or deactivate the alarm, press UP or
DOWN.
• Alarm deactivated: --:--
• Alarm activated: Alarm time is shown
W
The bell icons and
mode selected.

SILENCE ALARM

When the Alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press ALARM to silence it.
The Weekday Alarm will sound at the same time the
next day provided the next day is Monday - Friday. The
Single Alarm will not sound unless you manually activate
it again.
RMR616HGA lab test R2
S
indicate the alarm display
10

TEMPERATURE AND HUMIDITY

This product can display current, minimum, and
maximum temperatures and humidity percentage
information collected by the remote sensors.
Data is collected and displayed every 40 seconds.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location.
The switch is located in the battery compartment. The
setting for the main unit overrides the remote sensor
setting.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 3.
The icon shows the selected sensor.
Kinetic-
wave
SELECT MEASUREMENT UNIT
Icon
Designat-
Remote
Indoor
ed
Display
Display
Display
Channel 1
10
1/17/04, 5:03 PM
Remote Remote
Display Display
Channel 2 Channel 3