Description Of Parts; Front View; Back View; Installing And Replacing Batteries - Oregon Scientific BA113 User Manual

DESCRIPTION OF PARTS

FRONT VIEW

MODE
ALARM
STAND

BACK VIEW

HANGER HOLE
VENTILATION
SLOT
RESET
BATTERY
COVER
STAND
COMPARTMENT

INSTALLING AND REPLACING BATTERIES

The unit uses four UM-4 'AAA' size batteries. If the
'BATT' indicator appears, removes the exhausted
LCD
batteries and follow below steps to install or replace the
DISPLAY
batteries:
1. Lift and pull up the top center edge of the battery
2. Insert the batteries as indicated by the polarity symbols
MEMORY
3. Replace the battery compartment cover.
UP
NOTE After replacing the batteries, the display will be
turned on for about 3 seconds and then show the
following:
a. Indoor temperature shows the current measurement.
b. Indoor relative humidity shows the current
IN / OUT
SWITCH
c. Weather forecast shows slightly cloudy (a sun shows
OUTDOOR
SENSOR PLUG d. Pressure trend shows steady.
e. Clock show 12:00 (AM)
The unit takes about 24 hours to store the barometric
OUTDOOR
pressure data. Until that time has elapsed, the pressure
SENSOR
trend and weather forecast symbols may not reflect
PROBE
actual weather forecast for your area.
° °
C/ F SWITCH
3
compartment cover, than remove the cover.
(+ and -) marked inside the battery compartment.
measurement.
with the cloud indicator).