Denon DVD-2910 Operating Instructions Manual page 20

ENGLISH
B When "MULTI CHANNEL" is selected, use the • and ª
cursor buttons to select the item to be set, then press the
ENTER button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different
speakers.
DELAY TIME
Use this to set the distance from the different speakers to
the listening position.
To exit the SPEAKER SETUP mode
Use the ª cursor button to select "AUDIO SETUP" then
press ENTER button.
The SPEAKER CONFIGURATION settings only apply to
analog outputs.
B When "SPEAKER CONFIGURATION" is selected, use the
• and ª cursor buttons to select the speaker to be set
then press the ENTER button.
• The type of speaker used for the front speakers, center
speaker, subwoofer and surround speakers can be set.
Use the • and ª cursor buttons to select the speaker
type, then press the ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
3
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
Press the RETURN button to return to the "SPEAKER
SETUP" menu.
B When "CHANNEL LEVEL" is selected, use the • and ª
cursor buttons to select the speaker to be adjusted, then
use the 0 and 1 cursor buttons to set the level.
TEST TONE
• Use the 0 and 1 cursor buttons to select auto or
manual.
Adjust so that the volume of the test tones output from
the different speakers sounds the same.
• The volume level output from the front speakers (left
and right channels), center speaker, surround speakers
(left and right channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10 dB
in steps of 1 dB.
• Settings SW + 10 dB to "ON" increases by 10 dB the
volume level that is output from the subwoofer.
Press the RETURN button to return to the "SPEAKER
SETUP" menu.
20
Remote control unit Remote control unit
SPE AKE R SE TUP
SPE AKER CONF I GURAT I ON
CHANNE L L EVE L
DE L AY T I ME
AUD I O SE TUP
SE L EC T : DE C I S I ON : ENTER BUT TON
SPE AKER SE TUP
SPE AKER CONF I GURAT I ON
F RONT SP L ARGE
CENT ER SP L ARGE
SUBWOOF ER YES
SURROUND SP L ARGE
SE L ECT : DE C I S I ON : ENTER BUT TON
3
Remote control unit
SPEAKER SE TUP
CHANNEL LEVEL
The SRS TruSurround function (only for DVD-
T E ST TONE OF F
F RONT L CH 0 dB
videos and Video CDs)
CENT ER 0 dB
F RONT R CH 0 dB 2
SURROUND RCH 0 dB
SURROUND L CH 0 dB
SUBWOOF ER 0 dB
SW + 1 0 dB OFF
SE L ECT : DEC I S I ON : ENTER BUT TON
B When "DELAY TIME" is selected:
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening position
at the same time.
Use the • and ª cursor buttons to select the setting
item, then press the ENTER button.
• When "DISTANCE" is selected:
METERS (when the 0 cursor button is pressed):
The unit of distance is set to meters ("m").
FEET (when the 1 cursor button is pressed):
The unit of distance is set to feet ("ft").
• When "FRONT LCH", "FRONT RCH", "CENTER",
"SURROUND LCH", "SURROUND
"SUBWOOFER" is selected:
Use the and cursor buttons to set the distance
0 1
from the listening position to the different speakers.
The distance can be set within the range of 0 to
18 meters (60 feet).
The maximum difference in speaker distance for
which adjustment is possible is 4.5 meters (15
feet).
• When "DEFAULT" is selected:
When "DEFAULT" is selected and the ENTER button
is pressed, all the items are restored to their factory
default settings.
When digital connections are made with an AV amplifier,
make the speaker settings on the AV amplifier.
For DVD audio discs, the disc's settings are given
priority, so the sound may not be produced as set with
the above speaker mode setting.
Press the RETURN button to return to the "SPEAKER
SETUP" menu.
The multi-channel sound normally achieved with five
speakers is recreated using only the two front stereo
speakers. This results in a sound with a nearly natural
sense of movement that seems to surround the head,
without the strong directivity characteristic of multi-
speaker systems.
Remote control unit Remote control unit
SPEAKER SE TUP
DELAY TIME
D I STANC E METERS
F RONT L CH 3.6 m
F RONT RCH 3.6 m
CENT ER 3.6 m
3.0 m
SURROUND L CH
SURROUND RCH 3.0 m
SUBWOOF ER 3.6 m
ON
DE F AUL T
SE L ECT : DEC I S I ON : ENTER BUT TON
SPEAKER SE TUP
DELAY TIME
D I STANC E METERS
F RONT L CH 3.6 m
F RONT RCH 3.6 m
CENT ER 3.6 m
RCH",
SURROUND L CH 3.0 m
SURROUND RCH 3.0 m
SUBWOOF ER 3.6 m
ON
DE F AUL T
SE L ECT : DEC I S I ON : ENTER BUT TON
Remote control unit
SPEAKER SE TUP
DELAY TIME
D I STANC E METERS
F RONT L CH 3.6 m
F RONT RCH 3.6 m
CENT ER 3.6 m
SURROUND L CH 3.0 m
SURROUND RCH 3.0 m
SUBWOOF ER 3.6 m
DE F AUL T ON
SE L ECT : DEC I S I ON : ENTER BUT TON
SPEAKER SE TUP
DELAY TIME
D I STANC E METERS
3.6 m
F RONT L CC
3.6 m
F RONT RCH
3.6 m
CENT ER
SURROUND L CH 3.0 m
SURROUND RCH 3.0 m
SUBWOOF ER 3.6 m
DE F AUL T ON
SE L ECT : DEC I S I ON : ENTER BUT TON