Denon DVD-2910 Operating Instructions Manual page 19

e When "VIDEO OUT" is selected: (NOTES)
PROGRESSIVE (Factory default)
Select this when using the DVD-2910 connected to a
progressive type TV.
INTERLACED
Select this when using the DVD-2910 connected to an
interlace type TV.
NOTE:
• For the component output only, it is possible to switch
between interlace image output and progressive image
output. It is not possible to specify progressive image
output for the Video output connector or S-Video output
connector.
r When "PROGRESSIVE MODE" is selected:
AUTO 1 (Factory default)
Select this when the image recorded to the DVD is film
material.
AUTO 2
Select this when the image recorded to the DVD is 30-
frame film material.
VIDEO 1 TO 3
Select this when the image recorded to the DVD is video
material.
VIDEO 1
Select this for regular video material.
3
VIDEO 2
Select this for video material having little movement.
VIDEO 3
Select this for video material having a lot of movement.
t When "SQUEEZE MODE" is selected:
OFF (Factory default)
Select this to display without changing the
screen size.
ON
Select this when playing back a 4:3 image
that you wish to display at 4:3 aspect ratio at
the center of a 16:9 TV.
Only effective for set to "WIDE (16:9)" at "TV
ASPECT". (See page 18.)
No effective for interlaced image.
y When "AV1 VIDEO OUT" is selected:
VIDEO (Factory default)
Composite video signals will be output from the AV1
SCART terminal.
S-VIDEO
S video signals will be output.
RGB
RGB signals will be output.
To exit the setup mode
Use the ª cursor button to select "EXIT SETUP", then press the ENTER button. It is also possible to quit
by pressing the SETUP button on the remote control unit.
V I DEO SE TUP
TV ASPEC T
TV TYPE
V I DEO OUT PROGRE SS I VE
I NT ERL AC ED
PROGRE SS I V E MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT : DE C I S I ON : ENTER BUT TON
V I DEO SE TUP
TV ASPEC T
TV TYPE
V I DEO OUT
PROGRE SS I VE MODE AUTO1
SQUEE Z E MODE AUTO2
AV1 V I DEO OUT V I DEO1
V I DEO2
E X I T SE TUP V I DEO3
SE L ECT : DE C I S I ON : ENTER BUT TON
V I DEO SE TUP
TV ASPEC T
TV TYPE
V I DEO OUT
TV
PROGRE SS I VE MODE
SQUEE Z E MODE OFF
AV1 V I DEO OUT ON
E X I T SE TUP
TV
SE L ECT : DE C I S I ON : ENTER BUT TON
V I DEO SE TUP
TV ASPEC T
TV TYPE
V I DEO OUT
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT VIDEO
S-VIDEO
E X I T SE TUP
RGB
SE L ECT : DE C I S I ON : ENTER BUT TON
When "AUDIO SETUP" is selected
1
1
See page 14.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
AUDIO CHANNEL
Use this to adjust for the connected speaker systems.
DIGITAL OUTPUT
Use this to select the digital output's signal format.
LPCM (44.1 kHz/48 kHz)
Use this to set the digital audio output when playing DVDs
recorded in linear PCM audio.
SOURCE DIRECT
This permits a setting to output the audio without adding
2
speaker settings or channel level processing to the audio
signals of DVD audio or Super Audio CD.
BASS ENHANCER
Set whether or not to output audio signals from the
subwoofer when playing two-channel audio signals.
The BASS ENHANCER settings do not apply to digital
outputs.
COMPRESSION
Use this to set the dynamic range output when playing disc.
SACD FILTER
The low pass filter value when playing Super Audio CDs can
be set.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
q When "AUDIO CHANNEL" is selected:
B Use the • and ª cursor buttons to select the item to be
set, then press the ENTER button.
MULTI CHANNEL (Factory default)
Select this for systems in which three or more speakers
are connected.
When MULTI CHANNEL is set, the speaker settings
(SPEAKER CONFIGURATION), speaker output level
3
adjustment (CHANNEL LEVEL) and speaker distances
(DELAY TIME) can be set.
2CH(SRS OFF)
Select this does not use to the SRS TruSurround
function for systems in which only two speakers are
connected.
2CH(SRS ON) (See pages 20, 21.)
Select this use to the SRS TruSurround function for
systems in which only two speakers are connected.
The indicator " " in the display lights at this mode.
ENGLISH
1
1, 2, 3
Remote control unit Remote control unit
AUD I O SE TUP
AUD I O CHANNE L MUL T I CHANNE L
D I G I TAL OUTPUT NORMAL
L PCM (4 4 .1 kH z / 4 8 kH z) OF F
SOURCE D I RECT OF F
BASS ENHANCER OF F
COMPRESS ION OF F
SACD F I L TER 50kHz
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
Remote control unit Remote control unit
AUD I O SE TUP
AUD I O CHANNE L MUL T I CHANNEL
DIGITAL OUTPUT 2CH(SRS OFF)
L PCM (4 4 .1 kH z / 4 8 kH z) 2CH(SRS ON)
SOURCE D I RECT
BASS ENHANCER
COMPRESS ION
SACD F I L TER
E X I T SE TUP
SE L ECT : DEC I S I ON : ENTER BUT TON
19