Denon DVD-2910 Operating Instructions Manual page 18

ENGLISH
B When "DELAY TIME" is selected:
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening position
at the same time.
Use the • and ª cursor buttons to select the setting
item, then press the ENTER button.
• When "DISTANCE" is selected:
METERS (when the 0 cursor button is pressed):
The unit of distance is set to meters ("m").
FEET (when the 1 cursor button is pressed):
The unit of distance is set to feet ("ft").
• When "FRONT LCH", "FRONT RCH", "CENTER",
"SURROUND LCH",
"SUBWOOFER" is selected:
Use the 0 and 1 cursor buttons to set the distance
from the listening position to the different speakers.
3 The distance can be set within the range of 0 to
18 meters (60 feet).
The maximum difference in speaker distance for
which adjustment is possible is 4.5 meters (15
feet).
• When "DEFAULT" is selected:
When "DEFAULT" is selected and the ENTER button
is pressed, all the items are restored to their factory
default settings.
When digital connections are made with an AV amplifier,
make the speaker settings on the AV amplifier.
For DVD audio discs, the disc's settings are given
priority, so the sound may not be produced as set with
the above speaker mode setting.
Press the RETURN button to return to the "HDMI
SPEAKER SETUP" menu.
When the HDMI connection cable is disconnected,
the "SPEAKER CONFIGURATION", "CHANNEL
LEVEL", and "DELAY TIME" settings under "HDMI
SPEAKER SETUP" are stored.
18
Remote control unit
HDMI SPE AKE R SE TUP
D I STANCE
F RONT L CH
F RONT RCH
CENT ER
SURROUND L CH
SURROUND R CH
SUBWOOF ER
DE F AUL T
SE L ECT : DE C I S I ON : ENTER BUT TON
HDMI SPE AKE R SE TUP
D I STANCE
F RONT L CH
F RONT RCH
CENT ER
SURROUND L CH
"SURROUND RCH", SURROUND R CH
SUBWOOF ER
DE F AUL T
SE L ECT : DE C I S I ON : ENTER BUT TON
Remote control unit
HDMI SPE AKE R SE TUP
D I STANCE
F RONT L CH
F RONT RCH
CENT ER
SURROUND L CH
SURROUND R CH
SUBWOOF ER
DE F AUL T
SE L ECT : DE C I S I ON : ENTER BUT TON
HDMI SPE AKE R SE TUP
D I STANCE
F RONT L CH
F RONT RCH
CENT ER
SURROUND L CH
SURROUND R CH
SUBWOOF ER
DE F AUL T
SE L ECT : DE C I S I ON : ENTER BUT TON
When "VIDEO SETUP" is selected
Remote control unit
DELAY TIME
METERS
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
3.6 m
1 See page 14.
ON
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
TV ASPECT
DELAY TIME
Use this to set the shape of your TV's screen.
METERS
3.6 m
TV TYPE
3.6 m
Use this to set your TV's video format (NTSC, PAL or MULTI).
3.6 m
3.0 m
VIDEO OUT
3.0 m
Use this to select either the progressive image output or
3.6 m
ON 2
interlace image output.
PROGRESSIVE MODE
A method of progressive conversion can be set depending
on the image recorded to the DVD.
SQUEEZE MODE
The size of the screen to be output can be switched.
AV1 VIDEO OUT (For only European model)
To select whether composite video signals or S video signals
or RGB signals will be output from the AV1 SCART terminals.
Use the • and ª cursor buttons to select the desired setting,
then press the ENTER button.
q When "TV ASPECT" is selected:
4:3 PS
DELAY TIME
Select this to play wide DVDs in the pan & scan mode
METERS
(with the sides of the picture cut off). Discs for which pan
3.6 m
3.6 m
& scan is not specified are played in the letter box mode.
3.6 m
3.0 m 4:3 LB
3.0 m
Select this to play wide DVDs in the letter box mode (with
3.6 m
black strips at the top and bottom).
ON
WIDE (16:9) (Factory default)
Select this to play wide DVDs in the full-screen mode.
3
w When "TV TYPE" is selected:
NTSC
DELAY TIME
Select this when your TV's video format is NTSC.
METERS
3.6 m
If NTSC is selected, output format is fixed to NTSC.
3.6 m
PAL
3.6 m
3.0 m Select this when your TV's video format is PAL.
3.0 m
If PAL is selected, output format is fixed to PAL.
3.6 m
ON
MULTI (Factory default)
Select this when your TV is compatible with both the NTSC
and PAL formats.
If you play the disc recorded NTSC format, signal from
video output terminal will be switched to NTSC is selected,
output format is fixed to NTSC.
1
1
1, 2, 3
Remote control unit
V I DEO SE TUP
TV ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT :
V I DEO SE TUP
TV ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT :
V I DEO SE TUP
TV ASPECT
TV TYPE
V I DEO OUT
PROGRE SS I VE MODE
SQUEE Z E MODE
AV1 V I DEO OUT
E X I T SE TUP
SE L ECT :
Remote control unit
W I DE ( 1 6 : 9 )
MUL T I
PROGRESS I VE
AUTO1
OF F
VIDEO
DEC I S I ON : ENTER BUT TON
4 : 3 PS
4 : 3 L B
W I DE ( 1 6 : 9 )
DEC I S I ON : ENTER BUT TON
NTSC
PAL
MUL T I
DEC I S I ON : ENTER BUT TON