Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Denon DVD DVD-1930
Summary of Contents for Denon DVD DVD-1930
- Page 1 DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-1930...
-
Page 2: Precautions
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). -
Page 3: Warning
PRECAUTIONS Warning To avoid fire or electric shock, do not expose this unit to rain or moisture. WARNING: LIVE PARTS INSIDE. DO NOT REMOVE ANY SCREWS. Installation Location For safety and optimum performance of this unit: • Do not stand up the unit vertically. Install the unit in a horizon- tal and stable position. -
Page 4: Table Of Contents
TABLE OF CONTENTS ■ PRECAUTIONS ......2 Laser Safety ....... . . 2 Declaration of Conformity . -
Page 5: Introduction
INTRODUCTION The serial number of this product may be found on the back of the DVD player. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a per- manent record of your purchase to aid identification in case of theft. -
Page 6: About The Discs
ABOUT THE DISCS Playable Discs Playable Mark (logo) discs DVD-Audio * 2, 3, 5 DVD-Video * 1, 2, 3, 5 DVD-R DVD-RW * 1, 3, 4, 5, 6, 7, 8 Video CD * 1, 3, 5, 9 DIGITAL VIDEO Super Audio CD * 3, 5 Audio CD... -
Page 7: Features
FEATURES ¡ Progressive Scan system The progressive scan system provides less flickering and images in higher resolution than that of traditional 480i (525i), 576i(625i) or multi television signals through the interlace scan system. ¡Analogue 5.1-channel Dolby and DTS surround output This player is equipped with analogue Multi-channel Dolby and DTS surround audio out jacks for playback. -
Page 8: Functional Overview
FUNCTIONAL OVERVIEW FRONT PANEL ON / STANDBY ON / STANDBY REMOTE CONTROL The buttons with circled numbers can only be operated with the remote control. Loading the Batteries 1. Open the battery compartment cover. 2. Insert two “R6P” (AA) batteries, with each one oriented correctly. -
Page 9: Tour Of The Remote Control
FUNCTIONAL OVERVIEW Tour of the Remote Control Buttons on remote control work in different ways for DVD-Video, DVD-Audio, Video CD, Super Audio CD, Audio CD, MP3, JPEG, WMA and DivX ® Refer to the following table for correct use. DVD-Video, DVD-Audio POWER ON/OFF Buttons To turn on or standby the unit. - Page 10 FUNCTIONAL OVERVIEW Tour of the Remote Control DVD-Video, DVD-Audio To clear the markers. CLEAR Button To clear the numbers entered incorrectly. To cancel the A point for A-B Repeat. MENU Button To call up the menu on a disc. TOP MENU Button To call up the top menu on a disc.
-
Page 11: Front Panel Display
FUNCTIONAL OVERVIEW Front Panel Display Lights up when the progressive scan system is activated. Lights up when the disc playback comes to a pause. Lights up when playing back in slow mode. (DVD, VCD) Lights up when the inserted disc is being play back. The present display state is shown. -
Page 12: Connections
CONNECTIONS Description - Rear Panel 1. DIGITAL OUT Jacks (OPTICAL, COAXIAL) Use either an optical or coaxial digital cable (commercially available) to connect to an AV amplifier with a built-in decoder (AV control centre). 2. AUDIO OUT Jacks Use an Audio cable to connect to the Audio input jacks of A/V-compatible TV, wide screen TV or Stereo system. 3. -
Page 13: Connection To An Audio System
CONNECTIONS The following shows examples of connections commonly used to connect the DVD player to TV and other com- ponents. If using this DVD player to play back a DVD in a Dolby Digital Multi-channel surround or DTS surround format, the DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL OUT jacks. -
Page 14: Connection To 5.1-Channel Surround Sound System
CONNECTIONS Connection to 5.1-channel Surround Sound System Analogue 5.1-channel audio signals can be output from the DVD player. The multichannel audio signals recorded in packed PCM and the multichannel Super Audio CD can be played back when an AV amplifier equipped with analogue 5.1-channel audio inputs is connected. Centre speaker Front speaker (left) -
Page 15: Connection To A Tv (For Video)
CONNECTIONS Connection to a TV (for video) Method 1 Basic Connection 21-pin Scart jack Scart Cable (commercially available) AV1 OUT • Method 1 DVD Player + TV with 21-pin Scart Input Jack • Method 2 DVD Player + TV with Video Input Jack •... -
Page 16: Connection To A Tv With An Hdmi Compatible Port
CONNECTIONS Connection to a TV with an HDMI Compatible Port A simple 1-cable connection (using a commercially available cable) with a device having an HDMI (High- Definition Multimedia Interface) connector allows digital transfer of the digital images of DVD-Video and other sources, DVD-Video, and the multi-channel sound of DVD-Audio. -
Page 17: Disc Playback
DISC PLAYBACK Basic Playback Super DVD-V DVD-A Audio CD JPEG Getting started • Turn on the power of the TV, amplifier and any other com- ponents which are connected to the DVD player. • Make sure the TV and audio receiver (commercially avail- able) are set to the correct channel. -
Page 18: General Features
DISC PLAYBACK General Features DVD may contain menus to navigate the disc and access spe- cial features. Press the appropriate Numeric buttons or use the Cursor buttons (K / L / s / B) to highlight your selection in the DVD main menu and press the ENTER button to con- firm. -
Page 19: Resume
DISC PLAYBACK Resume Super DVD-V DVD-A Audio CD JPEG During playback, press the STOP button. • Resume message will appear on the TV screen. Press the PLAY button, playback will resume from the point at which playback was stopped. • To cancel resume, press the STOP button again. NOTES: •... -
Page 20: Zoom
DISC PLAYBACK Use the Cursor buttons (K / L / s / B) to move the zoomed picture across the screen. To exit the zoom mode, press the ZOOM button. NOTES: • Zoom function does not work while the disc menu is shown. -
Page 21: Track Search
DISC PLAYBACK Track Search Super DVD-A Audio CD There are two ways to begin playback a disc at a specific track. By using the SEARCH MODE button Press the SEARCH MODE but- ton. • The track search display appears. Within 30 seconds, select a desired track number using the Numeric buttons. -
Page 22: Repeat Track / Group / All
DISC PLAYBACK REPEAT TRACK / GROUP / ALL To activate Repeat function, press the REPEAT button during playback. • The repeat mode changes as described below every time you press the button. TRACK (repeat off) (current track repeat) NOTES: • In the track repeat, repeat setting will be cleared when moving to other track. -
Page 23: Random Playback
DISC PLAYBACK NOTES: • Press the STOP button once and then the PLAY button again, playback will restart from the point where the STOP button was pressed. (Programme continued.) • Press the STOP button twice and then the PLAY button again, playback will restart from the first track in the usual way. - Page 24 DISC PLAYBACK This player recommends the use of files recorded at the fol- lowing specifications: Applicable MP3 file • It is prohibited to record Sampling 44.1kHz MP3 sound on a digital frequency 48kHz device when the connection is made digitally. •...
-
Page 25: Divx Playback
DISC PLAYBACK DivX ® Playback This DVD player can play back DVD-R/RW and CD-R/RW discs recorded in DivX ® format. When a DVD-R/RW or CD- R/RW with DivX ® files is inserted in the DVD player, the file list will appear automatically on the TV screen. The number of tracks will be also displayed on the front panel. -
Page 26: Divx Subtitle
DISC PLAYBACK DivX ® Subtitle The subtitle created by the user can be displayed during DivX ® playback. After select the DivX ® file, the SUBTITLE LIST will appear except when the “DivX SUBTITLE” setting is “OFF”. Refer to “Language Setting” on page 29. SUBTITLE LIST FILE : file name1... -
Page 27: Audio Language
DISC PLAYBACK Press the DISPLAY button during playback. • Current file name will be dis- played. Press the DISPLAY button again. • Current track number/total tracks and elapsed time (MP3 and DivX ® ) will be displayed. • Current repeat setting appears only when the Repeat setting is active. -
Page 28: Camera Angle
DISC PLAYBACK NOTES: • Some discs allow the Subtitle Language setting on the disc menu. (Operation varies among discs. Refer to the manual accompanying the disc.) • Pressing the SUBTITLE button may not work on some DVDs with multiple subtitle languages (e.g. DVDs which allow the Subtitle Language setting on the disc menu). -
Page 29: Dvd Setup
DVD SETUP In setup menu, QUICK mode, CUSTOM mode and INITIALIZE mode are available (refer to pages 29-34). QUICK mode consists of items of which the setting menus are frequently used, and they are accompanied with QUICK mark. You can make all settings in CUSTOM mode. Language Setting Language setting can be varied with some DVDs or DivX Subtitles recorded in discs. -
Page 30: Audio Setting
DVD SETUP PROG.MODE (Default: AUTO1) • Press the Cursor buttons (K or L) to select a mode for the progressive scan output, then press the ENTER button. • AUTO1: mode suitable for images on the film material. • AUTO2: mode for images on the material of 30-frame film. -
Page 31: Speaker Setting For Analog Audio
DVD SETUP BASS ENHANCER (Default: OFF) • Set to ON for sound output on the bass-woofer channel when 2- channel audio source is played back. • This function is effective only for the 5.1ch AUDIO OUT jacks. Set the AUDIO MODE to ANALOG and ANALOG AUDIO to MULTI CHANNEL to set this function. -
Page 32: Speaker Setting For Hdmi Audio
DVD SETUP FRONT(L/R), CENTER, SURROUND(L/R) (Default: 3.6m) FRONT(L/R): The distance can be set within the range of 0 to 18.0m. CENTER, SURROUND: These depend on the setting value of FRONT(L/R). NOTES: • It is not possible to adjust this item if CENTER and SUR- ROUND have been set to NONE in the Speaker Configuration set- ting. -
Page 33: If You Forget The Password
DVD SETUP Press the Cursor buttons (K or L) to select a desired lev- el, then press the ENTER but- ton. Press the SETUP button to exit. NOTE: • This function may not work on some DVDs. Be sure if the RATINGS operates in the way you have set. -
Page 34: Reset To The Default Settings
DVD SETUP Reset to the Default Settings This allows you to return all selections of SETUP (except for RATINGS and VIDEO OUT) to their default settings. Press the SETUP button in stop mode. Press the Cursor buttons (s or B) to select INITIALIZE, then press the ENTER button. Press the Cursor buttons (K or L) to select YES, then press the ENTER button. -
Page 35: Troubleshooting Guide
TROUBLESHOOTING GUIDE If the DVD player does not perform properly when operated as instructed in these Operating Instructions, check the player, consulting the following checklist. Problem No power No sound or picture Distorted picture Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output No image from HDMI connection... - Page 36 TROUBLESHOOTING GUIDE Problem Buttons do not work or the player stops responding The DVD player does not respond to some operating commands during playback The DVD player cannot read CDs/DVDs Angle does not switch Playback does not start when the title is selected The password for rating level has been forgotten...
-
Page 37: Specifications
SPECIFICATIONS SIGNAL SYSTEM PAL colour APPLICABLE DISCS (1) DVD-Video/DVD-Audio Discs 1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs (1 layer per side) 1-layer 8 cm single-sided discs, 2-layer 8 cm single- sided discs, 2-layer 8 cm double-sided discs (1 layer per side) (2) Super Audio CD (3) DVD-R/DVD-RW... - Page 38 TOKYO, JAPAN Denon Brand Company, D&M Holdings Inc. www.denon.com Printed in China 1VMN23183 00D 511 4568 006 E6BE0ED/E6BE1ED *****...