Bike Mode (Rp109 Only); Set Up For Bike Mode; Step 1: Attach The Equipment To The Bicycle - Oregon Scientific OUTBREAKER RS109 User Manual

BIKE MODE (RP109 ONLY)

The OUTBREAKER sports watch comes complete with a
bicycle computer (and accessories), which records and displays
the following information:
• Speed: 0 – 255 km/hour or 0 – 158 mile/hour, depending on
the measurement unit you select (refer to the Clock Mode
section)
• Average speed (Max:255km/hr or 158 mile/hr)
• Maximum speed (Max:255km/hr or 158 mile/hr)
• Cadence: 0 – 255 rpm (pedal revolutions per minute)
• Distance traveled (Max:999.9 km or 620 miles)
• Total distance travelled (Max:99,999.9 km or 620,000 miles)
• Total time spent cycling
The BIKE Mode comprises pioneering technology that uses
two wireless sensors instead of one. The high frequency of
each sensor (868 MHz) eliminates possible interference between
the cadence and signal sensors, ensuring you accurate
performance measurements.

SET UP FOR BIKE MODE

To set up the BIKE Mode you must first do two things:
1. Attach the measuring equipment to your bicycle:speed
sensor (front wheel), cadence sensor (pedal), two magnets
(front wheel and pedal), and bike mount (handle bar). Refer
to the next section for instructions.
2. Specify your wheel circumference. See below for instructions.

STEP 1: ATTACH THE EQUIPMENT TO THE BICYCLE

20
Max 5 mm