Mazda 6 Manual page 90

Before Driving
Doors and Locks
Function number
1
2
3
4
5
6
*1 Other settings for the auto door lock function are
available at an Authorized Mazda Dealer. For
details consult an Authorized Mazda Dealer.
Refer to Personalization Features on page 9-9.
3-16
*1
Function
The auto door-lock
function is disabled.
All the doors lock
automatically when the
vehicle speed is about 20
km/h (12 mph) or more.
All the doors lock
automatically when the
vehicle speed is about 20
km/h (12 mph) or more. All
the doors unlock when the
ignition is switched from
ON to Off.
(Automatic transaxle
vehicles only)
When the ignition is
switched ON and the shift
lever is shifted from park
(P) to any other gear
position, all the doors lock
automatically.
(Automatic transaxle
vehicles only)
When the ignition is
switched ON and the shift
lever is shifted from park
(P) to any other gear
position, all the doors lock
automatically.
When the shift lever is
shifted to park (P) while the
ignition is switched ON, all
the doors unlock
automatically.
(Automatic transaxle
vehicles only)
All the doors lock
automatically when the
vehicle speed is about 20
km/h (12 mph) or more.
When the shift lever is
shifted to park (P) while the
ignition is switched ON, all
the doors unlock
automatically.
1. Safely park the vehicle. All doors must
remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
driver's door-lock switch within 20
seconds of switching the ignition ON,
and make sure a beep sound is heard
about eight seconds afterwards.
4. Referring to the auto lock/unlock
function setting table and determine the
function number for the desired setting.
Press the unlock side of the driver's
door-lock switch the same number of
times as the selected function number
(Ex. If you select function 2, press the
unlock side of the switch only 2 times).
5. Three seconds after the function setting
has been changed, a beep sound will
beep in the amount of the selected
function number. (Ex. Function
number 3 = 3 beep sounds)