Mazda 6 Manual page 279

NOTE
If water, snow, or mud is stuck on the camera lens, wipe it off using a soft cloth. If it cannot be
l
wiped off, use a mild detergent.
If the camera temperature changes rapidly (Hot to cold, cold to hot), the rear view monitor may
l
not operate correctly.
When replacing the tires, consult an Authorized Mazda Dealer. Replacing the tires could result in
l
deviation of the guide lines which appear on the display.
If the vehicle's front, side, or rear has been involved in a collision, the alignment of the rear view
l
parking camera (location, installation angle) may have deviated. Always consult an Authorized
Mazda Dealer to have the vehicle inspected.
If "No Video Signal Available" is indicated in the display, there could be a problem with the
l
camera. Have your vehicle inspected at an Authorized Mazda Dealer.
qRear View Parking Camera Location
qSwitching to the Rear View Monitor Display
Shift the selector lever to R with the ignition switched ON to switch the display to the rear
view monitor display.
NOTE
When the selector lever is shifted from R to another selector lever position, the screen returns to the
previous display.
Rear View Parking Camera
When Driving
Rear View Monitor
4-155