Mazda 6 Manual page 376

Interior Features
Bluetooth®
5. Select
6. Select .
Changing PIN code
PIN code (4 digits) can be changed.
1. Select the icon on the home screen
and display the Settings screen.
2. Select the
3. Select
4. Select
5. Select
6. Input the new PIN code to be set.
7. Select .
qAvailable Language (Type B)
®
The Bluetooth Hands-Free System
applies to the following languages:
English
l
Spanish
l
French
l
Refer to Settings on page 5-49.
qVoice Recognition (Type B)
In this section, the basic operation of the
voice recognition is explained.
Activating Voice Recognition
Press the talk button.
Ending Voice Recognition
Use one of the following methods:
Press the hang-up button.
l
Say, Cancel .
l
Operate the commander switch or the
l
center display (only when vehicle is
stopped).
5-88
.
tab.
.
.
.
Skipping Voice Guidance (for faster
operation)
Press and release the talk button.
Troubleshooting for Voice Recognition
If you do not understand an operation
method while in the voice recognition
mode, say Tutorial or Help .
Commands useable anytime during
voice recognition
Go Back and Cancel are commands
which can be used at anytime during
voice recognition.
Returning to previous operation
To return to the previous operation, say,
Go Back while in voice recognition
mode.
Cancel
To put the Bluetooth
in standby mode, say, Cancel while in
voice recognition mode.
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
The voice recognition cannot be
l
performed while voice guidance or
the beep sound is operating. Wait
until the voice guidance or the beep
sound is finished before saying your
commands.
Phone related commands are available
l
only when your phone is connected via
®
Bluetooth . Make sure your phone is
connected via Bluetooth
operate phone related voice commands.
Music play commands, such as Play
l
Artist and Play Album can be used
only in USB audio mode.
Do not speak too slowly or loudly (no
l
loud voice).
®
Hands-Free system
®
before you