Mazda 6 Manual page 227

Hide thumbs Also See for 6:
Table of Contents

Advertisement

NOTE
The LDWS does not operate until the
l
system detects a white or yellow line on
either the left or right.
When the system detects a white or yellow
l
line on one side only, the system will
activate the warning only when the vehicle
deviates on the side where the white or
yellow line is being detected.
The distance and warning sensitivity
l
(likelihood of a warning) which the system
uses to determine the possibility of a lane
departure can be changed.
Refer to Personalization Features on page
9-9.
Auto cancel
In the following cases, the LDWS cancels
automatically.
The temperature inside the camera is
l
high or low.
The windshield around the camera is
l
foggy.
The windshield around the camera is
l
blocked by an obstruction, causing
poor forward visibility.
When the LDWS cancels automatically,
the instrument cluster displays as follows.
Vehicle with type A instrument cluster
The lane indication (border line) is
indicated in the display.
The LDWS is enabled automatically when
operation conditions are met, and the lane
indication is indicated in the display.
Vehicle with type B instrument cluster
The LDWS warning light in the
instrument cluster turns on.
The LDWS warning light turns off when
the LDWS is operable.
i-ACTIVSENSE
Auto cancel warning
When the following operations are
performed, the LDWS determines that the
driver intends to make a lane change and
the LDWS warning is canceled
automatically. The LDWS is enabled
automatically after the driver performs the
operation.
The steering wheel is operated
l
abruptly.
The brake pedal is depressed abruptly.
l
The accelerator pedal is depressed
l
abruptly.
The turn signal lever is operated (after
l
the turn signal lever is returned, the
LDWS may not operate for about 3
seconds which is the period of time
required to make a lane correction).
NOTE
After about 60 seconds have elapsed with the
turn signal lever left operating, the LDWS
warning may operate if the vehicle is close to a
white or yellow line.
qCanceling the System
Press the LDWS switch to cancel the
LDWS. The LDWS OFF indication/
indicator light turns on.
The lane indication displayed in the type
A instrument cluster turns off.
When Driving
4-103

Advertisement

Table of Contents
loading

This manual is also suitable for:

6 2016

Table of Contents