Mazda 6 Manual page 368

Interior Features
Bluetooth®
NOTE
The display changes as follows depending on
whether the audio control dial is rotated
clockwise or counterclockwise.
_ Clockwise: "SURE ? YES" displayed
_ Counterclockwise: "SURE ? NO" displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select "GO BACK" and press the audio
control dial to return to the "PAIR DELETE"
display.
8. PAIR DELETED is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete the
paired device, "Err" flashes in the display for
three seconds and the display returns to
"LINK DELETE".
®
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
DEVICE INFO in the BT SETUP
mode. (Refer to Bluetooth
device set-up for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
device is displayed.
5-80
®
audio
®
unit
4. Rotate the audio control dial to select
the information for the Bluetooth
which you would like to view.
NOTE
When "GO BACK" is selected and the audio
control dial is pressed, the display returns to
"DEVICE INFO".
qAvailable Language (Type A)
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
If the language setting is changed, device
l
registration is maintained.
Phonebook records are not cleared, but
l
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
Do these steps before you start driving.
l
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
®
unit
Device name
BT address