Hotkey Beeper Control; Hotkey Summary Table - ATEN Master View CS-88A User Manual

Hotkey Beeper Control

The Beeper (see Activate Beeper, p. 28) can be Hotkey toggled On and Off.
To toggle the Beeper, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 15)
2. Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.

Hotkey Summary Table

[Num Lock] + [*] [Port ID] [Enter]
or
[Num Lock] + [-]
[T] [n] [Enter]
[A]
[←]
[→]
[B]
20
Switches access to the computer that
corresponds to that Port ID.
Sets the Auto Scan interval to n
seconds - where n is a number from 1 -
255.
Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P]
or Left Click pauses Auto Scanning.
When Auto Scanning is paused,
pressing Any Key or another Left Click
resumes Auto Scanning.
Invokes Skip Mode andSkips from the
current port to the first accessible port
previous to it.
Invokes Skip Mode andSkips from the
current port to the next accessible port.
Toggles the Beeper On or Off.
CS-88A User Manual
2002-12-27