Table of Contents
Advertisement
M F4 ADM:
F4 is an Administrator only function. It allows the Administrator to configure
and control the overall operation of the OSD. To change a setting use the Up
and Down Arrow Keys to move the highlight bar to it then press [Enter].
In order for this item to appear on the OSD Main Screen, a login with the
Administrator's Username and Password is required. See OSD Overview, p.
21, for setting the Administrator's Username and Password the first time the
OSD is invoked.
After you select an item, a submenu with further choices for you to select
from appears. Move the Highlight Bar to the choice you want, then press
[Enter]. An icon appears before the selected choice so that you know which
one it is. The settings are explained in the following table:
Setting
SET
This function is used to set Usernames and Passwords for the
USERNAME
Administrator and Users:
AND
PASSWORD
1. Usernames and Passwords for one Administrator and four
Users can be set.
2. After you select one of the User fields or the Administrator field,
a screen that allows you to key in a Username and Password
appears. The password may be up to 15 characters long, and
can consist of any combination of letters and numbers
(A - Z, 0 - 9).
3. For each individual, key in the Username and Password, then
press [Enter].
4. To modify or delete a previous Username and/or Password,
use the backspace key to erase individual letters or numbers.
Note: To clear all Username and Password information and have
the Switch return to its default (empty) state, see p. 34.
SET LOGOUT
If there is no input from the console for the amount of time set
TIMEOUT
with this function, the Operator is automatically logged out. A
login is necessary before the console can be used again. This
enables other Operators to gain access to the computers when
the original Operator is no longer accessing them, but has
forgotten to log out. To set the timeout value, key in a number
from 1 - 180 minutes, then press [Enter]. If the number is 0
[zero], this function is disabled. Default is 0.
(Table continues on next page)
CS-88A User Manual
Function
2002-12-27
27
Advertisement
Table of Contents
