Computer Keyboard / Mouse Reset; Hotkey Beeper Control - ATEN CL6708MW User Manual

Single rail 8-port dvi fhd lcd kvm switch

Hide thumbs Also See for CL6708MW:

Table of Contents

CL6708MW User Manual

Computer Keyboard / Mouse Reset

If the keyboard or mouse cease to function on the computer connected to the

currently selected port, you can perform a keyboard / mouse reset on the

computer. This function is essentially the same as unplugging and replugging

the keyboard and mouse on the target computer. To perform a computer

keyboard / mouse reset, key in the following hotkey combination:

1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]

combination.

2. Press [F5].

After you press [F5], you automatically exit Hotkey mode and regain keyboard

and mouse control on the computer connected to the KVM port. If you fail to

regain keyboard / mouse control on the computer after pressing [F5], perform

a console keyboard and mouse reset.

The beeper (see ACTIVATE BEEPER, page 35) can be hotkey toggled on and

off. To toggle the beeper, key in the following hotkey combination:

1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]

combination.

2. Press [B].

After you press [B], the beeper toggles on or off. The command line displays

Beeper On or Beeper Off for one second; then the message disappears and you

automatically exit hotkey mode.

Table of Contents