Table of Contents
Advertisement
(F4 ADM: continued)
Setting
EDIT PORT
To help remember which computer is attached to a particular
NAMES
port, every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
Note: Only the Ports currently chosen for the LIST view on the
main OSD screen (see p. 24), show up here.
To Edit a port name:
1. Use the Navigation Keys to move the highlight bar to it, then
press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
M All alpha characters: a - z; A - Z
M All numeric characters: 0 - 9
M + - / : . and Space
Case does not matter; OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
This function is used to undo all changes and return the setup to
DEFAULT
the original factory default settings (see p. 37) - except for the
VALUES
Names and QUICK VIEW settings that were assigned to the
Ports. These latter two are saved.
CLEAR THE
This function is similar to Restore Default Values. The difference
NAME LIST
is that it also clears the Port Names and QUICK VIEW settings
along with undoing all changes and returning the setup to the
original factory default settings.
ACTIVATE
Choices are Y (for On), or N (for Off). When activated, the
BEEPER
beeper sounds whenever a Port is changed; when activating the
Auto Scan function (see p. 30); or an invalid entry is made on an
OSD menu. The default is Y.
(Table continues on next page)
28
Function
CS-88A User Manual
2002-12-27
Advertisement
Table of Contents
