Table of Contents
Advertisement
OSD Factory Default Settings
The factory default settings are as follows:
Setting
OSD Hotkey
Port ID Display Position
Port ID Display Duration
Port ID Display Mode
Scan Duration
Scan Mode
Screen Blanker
Logout Timeout
Beeper
Accessible Ports
Limited Warranty
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE
PRICE PAID FOR THE PRODUCT FROM THE DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, DISK OR ITS DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or
statutory with respect to the contents or use of this documentation, and specially
disclaims its quality, performance, merchantability, or fitness for any particular
purpose.
The direct vendor also reserves the right to revise or update the device or
documentation without obligation to notify any individual or entity of such
revisions, or update. For further inquires please contact your direct vendor.
CS-88A User Manual
Default
[Scroll Lock] [Scroll Lock]
Upper Right Corner
3 Seconds
The Port Number plus the Port Name
5 Seconds
All
0 (Off)
0 (Off)
Y (Activated)
V (View Only) For all Users on all Ports
2002-12-27
37
Advertisement
Table of Contents
