Summary - Gigaset SX763 Manual

This function corresponds to pressing the Scan button on the device's back panel.
Once WPS registration is activated, the device searches for a WPS client within range.
Any WPS client within range that activates the WPS function during the two-minute
interval receives the Gigaset SX763 WLAN dsl security data (SSID and pre-shared
key) and is thereby registered.
The registration progress is shown in the window.
You can repeat these steps for each WLAN client to be registered.
Only one client may register during the two-minute interval. If two clients try to reg-
sister at the same time, the registration will be broken down and an error message
appears.
ì
To go to the next step, click Next >

Summary

The basic settings you have made through the wizard are shown in the next step for you
to check.
ì
If you want to change the settings, click < Back.
ì
If you want to confirm the settings, click Finish to close the Basic Setup Wizard.
The Gigaset SX763 WLAN dsl is now configured and ready to connect to the Internet.
The Security Setup Wizard then opens automatically. We strongly recommend using
the Security Setup Wizard to protect your Gigaset SX763 WLAN dsl against attacks. If you
want to carry this out at a later stage, deactivate I would like to run the Security Setup
Wizard now.
Basic Setup Wizard
47