Print Server - Gigaset SX763 Manual

Configuring Advanced Settings
ì
Choose the Directory in which the data is stored on the USB mass storage device
using the Browse button.
You can allow general access for both FTP services, or only for selected users with a user
name and password.
ì
For Access (read only), select whether all users should be able to read your data in
Anonymous mode or whether only one Specified user should be supported.
ì
Specify whether Access (full control) to your data should be disabled or whether a
Specified user may read, edit and delete your data.
ì
Enter the name in the Specified user field. Define different user names for the dif-
ferent access type and directory.
ì
Enter the password for the user and confirm it by entering it again in the field below.
The password is case-sensitive. Avoid using proper names and obvious terms.
Instead, use upper case and lower case letters, numbers and special characters.
ì
Click OK to apply the changes.

Print Server

Your device's integrated print server allows you to provide a USB printer for all users in
the local network.
Notes:
The Windows Vista, Windows XP or Windows 2000 operating system is a prereq-
u
uisite for using the print server.
Only printer functionality is supported in the case of multifunction devices (com-
u
bination of printer, scanner or fax). You can obtain additional information by con-
tacting the hotline or else on the Internet (address see Quick Start Guide).
If you wish to use this function, you must first connect a USB printer to your device's USB
port. The device must be shown in the screen. You can check the status of the connec-
tion to the USB device on the Advanced Settings – USB screen.
ì
In the Advanced Settings menu, select: USB – Print Server
114