Local Firmware Update - Gigaset SX763 Manual

Local firmware update

ì
End all network activities in the local network.
ì
Choose Local as Firmware update source if you have already loaded the firmware
file you want to install on your PC (see page 129).
The firmware version that is currently installed on the device is displayed in the Current
firmware version line.
ì
In the Local firmware update file field, enter the file with the new firmware that
you have downloaded from the Internet or click Browse to search for the file in your
PC's file system.
ì
Click Start firmware update. The firmware will now be updated.
Warning:
Do not turn off the Gigaset SX763 WLAN dsl during the updating procedure and do
not interrupt the power supply. Turning off the device can make it unusable. The
update can take several minutes.
Gigaset Communications GmbH accepts no liability for damage that occurs through
improper use.
After a successful update, the device is automatically rebooted. All LEDs go out. The
login screen is displayed again.
To see whether the upgrade procedure was successfully completed, check the current
software version displayed in the overview of the Status menu (page 134).
Administration
131