Gigaset SX763 Manual page 163

Symptom
After a WPS registration the
WLAN LED shows successful
registration but the desired
client was not registered.
You cannot open a connec-
tion to the Gigaset SX763
WLAN dsl from a wireless
device.
Possible cause and solutions
Maybe an external device has registered with your net-
work.
ì
Change the WPA PSK key manually as soon as
possible (see page 88) and perform the WPS
registration via PIN (see page 85).
You attempted to perform WPS registration on the
u
network adapter but the registration button was
not activated on the Gigaset SX763 WLAN dsl.
ì
Press the Registration button (Scan button) on the
Gigaset SX763 WLAN dsl and activate WPS within
the two-minutes interval on the network adapter.
You defined a PIN for WPS registration but the net-
u
work adapter does not use a PIN or uses a different
one.
ì
Check the wireless network encryption settings and
determine the PIN used by the Gigaset SX763
WLAN dsl. Enter this PIN on the network adapter.
You defined a PIN for WPS registration at the net-
u
work adapter but you didn't enter this PIN at the
Gigaset SX763 WLAN dsl PIN or not the right one.
ì
Find out the PIN that is used by the network
adapter. Enter this PIN on the Gigaset SX763 WLAN
dsl.
The wireless network adapter is not using the cor-
u
rect SSID.
ì
Change the SSID on the network adapter or use the
WPS function.
Appendix
163