Gigaset SX763 Manual page 23

LED State
On
Flashing
ADSL
Off
On
Line Flashing
Off
On
Online
Off
On (green)
USB
Flashing
Off
On
LAN1 –
Flashing
LAN4
Off
In normal operation
On
Flashing
Off
During WPS registration
WLAN
On (300 sec) WPS registration was successful.
Flashing
slowly
Flashing
quickly
Flashing
quickly with
interruption
On
VoIP Flashing
Off
Status
A DSL connection is established.
The DSL line is being synchronised. The synchronisation
phases are shown as slow flashing (registering) and fast
flashing (training).
If no DSL cable is connected, the LED will flash at uniform
intervals.
DSL is deactivated.
One of the connected phones' receivers has been lifted for a
call (fixed network telephony).
The phone is ringing and a fixed network call is being
received or someone is waiting on the line.
There is currently no fixed network connection.
Connection to the Internet has been established.
There is no Internet connection.
A device is connected to the Gigaset SX763 WLAN dsl via the
USB port.
The device connected on the USB port is using too much
power (see (page 166)).
There is no device connected.
A device is connected to the relevant LAN port.
The relevant LAN port is sending or receiving data (traffic).
There is no device connected.
The radio interface is activated, no data transmission at
present.
The Gigaset SX763 WLAN dsl is sending or receiving data on
the radio interface.
The radio interface is deactivated.
WPS registration is in progress.
WPS registration was not successful.
More than one client tried to register.
At least one port is configured for VoIP and VoIP access is
registered with the provider.
A call is currently being made via the Internet.
There is currently no connection for Internet telephony or no
VoIP port has been configured.
First steps
23