Display Assembly - HP ProBook 640 G1 Maintenance And Service Manual

Display assembly

NOTE: The Display Panel Support Kit is also required for full display assembly replacement.
Description
15.6-in. WLED FHD, UWVA display panel
15.6-in. WLED HD, UWVA display panel
14-in. HD AG WLED SVA eDP FLT display panel
14-in. HD+ AG WLED SVA eDP FLT display panel
14-in. FHD AG WLED UWVA eDPslim PSR display panel
Display Panel Support Kit (includes LCD back cover and wireless antennas and transceivers):
For use on models equipped with a 15.6-in. display assembly
For use on models equipped with a 14-in. display assembly
To remove the display assembly and access the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Remove the display assembly:
1. Open the computer.
2. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
104 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 56).
Spare part number
739998-001
739997-001
747751-001
747752-001
747753-001
738691-001
738680-001