Speakers - HP ProBook 640 G1 Maintenance And Service Manual

Speakers

Description
Speakers (includes cable)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Hard drive (see
c. Optical drive (see
d. Keyboard (see
e. Base enclosure (see
Remove the speakers:
1. Disconnect the speaker cables (1) and (4) from the system board.
2. Remove the two Phillips PM2.0×3.0 screws (2) and (5) that secure the speakers to the base enclosure.
Battery on page 56), and then remove the following components:
Service cover on page
Hard drive on page 58)
Optical drive on page
Keyboard on page 72)
Base enclosure on page
57)
69)
82)
Spare part number
738404-001
Speakers 95