Connections - Denon dra-f101 Operation Instruction Manual

ENGLISH
4

CONNECTIONS

2 When connecting, also refer to the manuals of the other components.
When connecting to the D-F101 series, make the system connections shown by dotted lines on the diagram below.
2
2 The DRA-F101 is not equipped with connection cords. Use the connection cords included with the components you are
connecting to the DRA-F101.
NOTES:
• Do not plug the power cords into the power outlets until all connections have been completed.
• Check the left and right channels and be sure to interconnect them correctly (R to R, L to L).
• Plug in the power cords securely. Incomplete connections will result in noise.
• Use the AC OUTLET for audio equipment only. Do not use them for hair driers, etc.
• Do not clasp the connection cords together with the power cords or place them near other electric products. Doing so may
result in noise.
• The PHONO input jack is extremely sensitive. A booming sound may be produced from the speakers if the volume is turned
up when no turntable is connected.
• The sound of another component may be heard if no component is connected to the input jacks of the function selected
with the FUNCTION selector.
DVD player
B
DVD
R L R L L R
FM COAX. AM LOOP ANT. 1
75
ANTENNA
INPUTS TAPE MD
L
R
PHONO CD DVD/AUX PB REC PB
L R L R L R
NOTE:
• If noise is generated
when the ground wire is
connected, disconnect
the ground wire.
NOTE:
Turntable
• This unit cannot be used with MC cartridges directly. Use a head
(with MM cartridge)
amplifier or a step-up transformer with MC cartridges.
6
Speaker system
(L) (R)
2 SYSTEM
R L
CONNECTOR
+
PRE
OUT
-
AC OUTLET
230V 50Hz
SWITCHED
SPEAKER SYSTEM W MAX
SUB
SPEAKER IMPEDANCE 4~16
REC WOOFER
R L
Subwoofer
• The D-F101 series stereo
receiver (DRA-F101) is
equipped with a clock and timer
function, so be sure to connect
it to a wall power outlet to
which power is supplied
constantly.
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Power plug
(for U.K. model)
• When making system connections with the D-F101 series, connect
the system cord to the DRA-F101 system connector (either 1 or 2).
Also interconnect the other system components in the same way.
(System connections are indicated by dotted lines on the diagram.)
Cassette deck (DRR-F101)
L
R
L
R
MD recorder (DMD-F101)
L
R
L
R
L
R
CD player (DCD-F101)
NOTE:
• To allow for heat dispersal, do
not place another component
or any other object directly on
top of the DRA-F101.