Remote Control Unit (Rc-927) - Denon dra-f101 Operation Instruction Manual

Number buttons
Press these buttons to recall
preset station.
Examples:
To call the station at preset
number 12:
Press ,
+10 2
To call the station at preset
number 29:
Press , ,
+10 +10 9
RDS button (RDS)
BAND button (BAND)
Use this button to selecting the
band.
FM AUTO FM MONO AM
PRESET button (PRESET)
Use these buttons to recall preset
stations on the tuner.
Press this button after selecting
"PTY" with RDS button to select
one of the 29 program types.
SLEEP button (SLEEP)
Press this button to set the sleep
timer
The buttons above for which there are no explanations cannot be operated with the DRA-F101.
Buttons not described here function in the same way as the corresponding buttons on the main unit.
2
Power standby button
(SYSTEM POWER STANDBY)
Press this to set the DRA-F101's
power to the standby mode.
(When connected in a system
with the D-F101 series, this
button sets the power of the
entire system to the standby
mode.)
D-F101 series
function operation block
When connected in a system
with the D-F101 series, these
buttons are used to operate the
various connected system
components.
For operating instructions, refer
to the manuals of the various
components.
FUNCTION button
Press this to select the function
source to be played.
The function switches in the
following order each time the
button is pressed:
CD TUNER DVD/AUX
TAPE
MD TAPE PHONO
Remote control
function selector switch
Use this to select the function to
be operated with this remote
control unit. Set to TUNER to use
the DRA-F101's tuner function.
For instructions on operating the
various components, refer to their
respective manuals.
Power on button
(SYSTEM POWER ON)
When this button is pressed
while the DRA-F101's power is in
the standby mode, the DRA-
F101's power turns on.
(When connected in a system
with the D-F101 series, this
button turns on the power of the
entire system.)
OFF ON
SYSTEM
POWER
PROG /
DIRECT
1 2 3 DIMMER button
CALL
4 5 6 The display becomes darker (in 4
CLEAR
steps) each time this button is
7 8 9
pressed.
RANDOM REPEAT
10 +10 Adjust the brightness of the
CD SRS
TIME EDIT
TAPE MD display according
brightness of the room.
TIME/
DIMMER
PANEL
RDS BAND TUNING
STOP PLAY VOLUME
/SELECT
VOLUME/SELECT buttons
PRESET
+ • Press D to increase the
volume, H to decrease it.
-
• These buttons are also used to
set various modes.
TAPE
SLEEP FUNCTION MODE
CD
TUNER
MD
MODE button
RC-927
REMOTE CONTROL UNIT
Models compatible with system remote control
• Receiver : DRA-F101
• CD player : DCD-F101
• Cassette deck : DRR-F101
• MD recorder : DMD-F101
to the
PANEL button (PANEL)
TUNING button (•,ª)
Use these buttons to selecting
the station.
ENGLISH
11