Connections - Denon DRA-F101 Operating Instructions Manual

Hide thumbs Also See for DRA-F101:
Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
4

CONNECTIONS

2
When connecting, also refer to the manuals of the other components.
When connecting to the DCD-F101, make the system connection shown by dotted line on the diagram below.
2
2
The DRA-F101 is not equipped with connection cord. Use the connection cord included with the DCD-F101.
NOTES:
• Do not plug the power cords into the power outlets until all connections have been completed.
• Check the left and right channels and be sure to interconnect them correctly (R to R, L to L).
• Plug in the power cords securely. Incomplete connections will result in noise.
• Use the AC OUTLET for audio equipment only. Do not use them for hair driers, etc.
• Do not clasp the connection cords together with the power cords or place them near other electric products. Doing so may
result in noise.
• The PHONO input jack is extremely sensitive. A booming sound may be produced from the speakers if the volume is turned
up when no turntable is connected.
• The sound of another component may be heard if no component is connected to the input jacks of the function selected
with the FUNCTION selector.
DVD player
B
DVD
R
L
R
L
L
R
FM COAX.
AM LOOP ANT.
1
75
ANTENNA
INPUTS
TAPE
MD
L
R
PHONO
CD
DVD/AUX
PB
REC
PB
L
R
L
R
L
R
NOTE:
• If noise is generated
when the ground wire is
connected, disconnect
the ground wire.
NOTE:
Turntable
• This unit cannot be used with MC cartridges directly. Use a head
(with MM cartridge)
amplifier or a step-up transformer with MC cartridges.
6
Speaker system
(L)
(R)
2
SYSTEM
R
L
CONNECTOR
+
PRE
OUT
-
SPEAKER SYSTEM
SUB
SPEAKER IMPEDANCE 4~16
REC
WOOFER
R
L
Subwoofer
• The D-F101 series stereo
receiver
(DRA-F101)
is
equipped with a clock and timer
function, so be sure to connect
it to a wall power outlet to
which power is supplied
constantly.
Power plug
AC 120V, 60 Hz
(Plug into a power outlet)
• When making system connection with the DCD-F101, connect the
system cord to the DRA-F101 system connector (either 1 or 2).
(System connection is indicated by dotted line on the diagram.)
Cassette deck
L
R
L
R
MD recorder
L
R
L
R
L
R
CD player (DCD-F101)
NOTE:
• To allow for heat dispersal, do
not place another component
or any other object directly on
top of the DRA-F101.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents