Sony MHC-GT5D Operating Instructions Manual page 75

Party Chain
Party Chain function cannot be
activated.
Check the connections
• •
(page 60).
Make sure the audio cords are
• •
connected correctly.
"PARTY CHAIN" is flashing on the
display.
You cannot select the Audio In
• •
function if you make a connection
 (page 60) while using the
Party Chain function. Select a
function other than the Audio In
function (page 62).
Press PARTY CHAIN on the
• •
subwoofer.
Try turning off the system, then
• •
turning it back on again.
Party Chain function does not
work properly.
Turn off the system. Then, turn it
• •
back on again to activate the Party
Chain function.
Resetting the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the subwoofer to
perform this operation.
1
Unplug the AC power cord, and
then plug it back in.
2
Press  to turn on the system.
3
Hold down ENTER and TUNING+/
 for about 3 seconds.
"RESET" appears on the display.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Returning the setup menu
settings to the default
You can return the setup
menu settings (except for
[PARENTAL CONTROL] settings) to
the default settings.
1
Press SETUP.
2
Press / repeatedly to select
[SYSTEM SETUP], then press
3
Press / repeatedly to select
[RESET], then press
4
Press / repeatedly to select
[YES], then press
It takes a few seconds to complete.
Do not press  while resetting the
system.
.
.
.
75
GB