Sony MHC-GT5D Operating Instructions Manual page 43

Setting the TV screen
– [VIDEO SETUP]
[TV TYPE]
[16:9]: Select this when you connect
a wide-screen TV or a TV with a
wide-mode function.
[4:3 LETTER BOX]: Select this
when you connect a 4:3 screen TV
that does not have a wide-mode
function. This setting displays a wide
picture with black bands on the top
and bottom.
[4:3 PAN SCAN]: Select this when
you connect a 4:3 screen TV that
does not have a wide-mode
function. This setting displays a full-
height picture on the entire screen,
with trimmed sides.
[COLOR SYSTEM(VIDEO CD)]
(Except for Latin American,
European, and Russian models)
Sets the color system (PAL or NTSC)
when you play back a VIDEO CD.
[AUTO]: Outputs the video signal
according to the color system of the
disc. Select this setting if your TV
uses a DUAL system.
[PAL]: Changes the video signal of
an NTSC disc and output it in PAL
system.
[NTSC]: Changes the video signal
of a PAL disc and output it in NTSC
system.
For details, see "Changing the color
system" (page 30).
[BLACK LEVEL]
(Latin American model only)
Selects the black level (setup level)
for the video signals output from the
VIDEO OUT jack.
[ON]: Sets the black level of the
output signal to the standard level.
[OFF]: Lowers the standard black
level. Use this when the picture
becomes too white.
[PAUSE MODE]
[AUTO]: The picture, including
subjects that move dynamically, is
output with no jitter. Normally select
this position.
[FRAME]: The picture, including
subjects that do not move
dynamically, is output in high
resolution.
43
GB