Sony MHC-GT5D Operating Instructions Manual page 65

1
Prepare the sound source.
Play Timer:
Prepare the sound source, then
press  +/– to adjust the volume.
When selecting a disc or USB device
as a sound source, and you want to
start from a specific track or file,
create your own program
(page 38).
Recording Timer:
Tune to the radio station
(page 50).
2
Hold down SHIFT, then press
TIMER MENU.
3
Press / repeatedly to select
"PLAY SET" or "REC SET," then
press .
4
Set the time to start playback or
transfer.
Press / repeatedly to set the
hour/minute, then press
5
Use the same procedure as in
step 4 to set the time to stop
playback or transfer.
6
Press / repeatedly to select
the sound source you want,
then press .
For Recording Timer, connect a USB
device to the (USB) 2 port after
selecting the sound source.
7
Press  to turn off the system.
Note
If the system remains on, the timers will
not take effect.
To check the timer setting or
activate the timer again
1
Hold down SHIFT, then press
TIMER MENU.
"TIMER SEL" flashes on the display.
2
Press
3
Press / repeatedly to select
"PLAY SEL" or "REC SEL," then
press
To cancel the timer
Repeat the same procedure as
"To check the timer setting or
activate the timer again" and select
"TIMER OFF" in step 3, then press
Notes
The system turns on before the preset
• •
time. If the system is already turned
on at the preset time or if "STANDBY"
flashes on the display, the Play Timer
and the Recording Timer will not be
activated.
.
Do not operate the system from the
• •
time the system turns on until the
playback or transfer starts.
.
.
.
65
GB