Sony MHC-GT5D Operating Instructions Manual page 53

4
Perform the pairing procedure
on the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select the system's name (for
example, "MHC-GT5D") on the
display of the BLUETOOTH
device.
Perform this step within 5 minutes,
otherwise pairing will be canceled.
In this case, repeat from step 3.
Note
If passkey is required on the
BLUETOOTH device, enter "0000".
"Passkey" may be called "Passcode,"
"PIN code," "PIN number," or
"Password."
6
Perform the BLUETOOTH
connection on the BLUETOOTH
device.
When pairing is completed and the
BLUETOOTH connection is
established, BLUETOOTH device
name appears on the display.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
You can check the BLUETOOTH
device address by pressing DISPLAY
repeatedly.
Notes
You can pair up to 9 BLUETOOTH
• •
devices. If the 10th BLUETOOTH device
is paired, the oldest paired device will
be deleted.
If you want to pair with another
• •
BLUETOOTH device, repeat steps 1 to 6.
To cancel the pairing operation
Hold down PAIRING on the
subwoofer for 2 seconds or more
until "BLUETOOTH" appears on the
display.
To delete pairing information
Use the buttons on the subwoofer to
perform this operation.
1
Press BLUETOOTH to select the
BLUETOOTH function.
"BLUETOOTH" appears on the
display.
If the system is connected to a
BLUETOOTH device, the BLUETOOTH
device name appears on the display.
Press BLUETOOTH to terminate the
BLUETOOTH connection.
2
Hold down ENTER and
about 3 seconds.
"BT HISTORY CLEAR" appears on the
display and all the pairing
information is erased.
– for
53
GB