Sony MHC-GT5D Operating Instructions Manual page 22

Attaching the speaker units
onto the mounting rod of the
subwoofer (Line array style)
Note
Remove any USB devices from the system
beforehand to prevent them from being
damaged by accidentally dropping the
speaker units.
1
Pull up the mounting rod of the
subwoofer.
• U nlock the stopper, then pull up
and extend the rod while
pressing the release button.
• R elease the button and stop the
rod at the desired position. The
rod stops in two positions along
with the holes in the rod. Lock
the stopper and make sure the
rod is securely fastened.
22
GB
Stopper
Release button
Notes
Adjust the position of the rod before
• •
attaching the speaker units.
Be careful not to get your hand
• •
caught when putting the rod back
into the storing position.
2
Mount the speaker units to the
attachments.
• O pen the lock lever.
• A lign the bracket of the speaker
unit with the bracket of the
speaker attachment, and then
slide down to attach the speaker
unit.