Listening To Music On A Bluetooth Device - Sony MHC-GT5D Operating Instructions Manual

Listening to music on a
BLUETOOTH device
You can operate a BLUETOOTH
device by connecting the system
and the BLUETOOTH device using
AVRCP.
Check the following before playing
music:
•
— The BLUETOOTH function of the
BLUETOOTH device is turned on.
•
— Pairing has been completed
(page 52).
Once the system and the
BLUETOOTH device are connected,
you can control playback by
pressing , , , / and
/.
1
Press BLUETOOTH on the
subwoofer to select the
BLUETOOTH function.
"BLUETOOTH" appears on the
display.
2
Perform a BLUETOOTH
connection with the BLUETOOTH
device.
Press BLUETOOTH on the subwoofer
to connect to the last connected
BLUETOOTH device.
Perform the BLUETOOTH connection
from the BLUETOOTH device if the
device is not connected.
Once the connection is established,
the BLUETOOTH device name
appears on the display.
3
Press  to start playback.
Depending on the BLUETOOTH
device,
— you may need to press  twice.
— you may need to start playing an
audio source on the BLUETOOTH
device.
54
GB
4
Adjust the volume.
Adjust the volume of the
BLUETOOTH device first. If the
volume level is still too low, adjust
the volume level on the system.
Notes
When the system is not connected to
• •
any BLUETOOTH device, the system
will connect to the last connected
BLUETOOTH device automatically
when you press BLUETOOTH on the
subwoofer or .
If you try to connect another
• •
BLUETOOTH device to the system, the
current connected BLUETOOTH device
will be disconnected.
To terminate the BLUETOOTH
connection
Press BLUETOOTH on the subwoofer.
"BLUETOOTH" appears on the
display.
Depending on the BLUETOOTH
device, the BLUETOOTH connection
may be terminated automatically
when you stop playback.