Operational Instructions - Stamina 85-2221A Owner's Manual

Wirk ride workstation
Table of Contents

Advertisement

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON :
Pedal movement or press the button.
POWER OFF :
A u t o m a t i c a l l y s h u t s o ff a f t e r f o u r
minutes of inactivity.
MODE BUTTON:
Press to select display functions, include SCAN, TIME,
SPEED, DISTANCE, CALORIES, and ODOMETER.
Press and hold for two seconds to reset all functions to
zero, except ODOMETER.
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, SPEED, DISTANCE, CALORIES, and
ODOMETER in sequence, display changes every six seconds. Press and release the
button until "SCAN" appears on the display.
TIME:
Displays the time from one second up to 99:59 minutes.
SPEED:
Displays the current speed from zero to 999.9 miles per hour.
DISTANCE:
Displays the distance from zero to 999.9 miles.
CALORIES:
Displays the calories burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
ODOMETER:
Displays the total accumulated distance you have traveled from zero to 9999 miles.
The total accumulated distance is retained when the meter is turned off.
NOTE:
1. The meter will shut off automatically after four minutes of inactivity. All function
2. The ODOMETER will be reset to zero after batteries are removed for battery
HOW TO INSTALL AND REPLACE BATTERIES:
1. U s e h a n d o r s i m p l e t o o l t o p r y t h e M E T E R (19) f r o m t h e
DESKTOP(21).
2. The meter operates with two AAA batteries, the batteries are not
included. Refer to the illustration to install or replace the batteries.
NOTE:
1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
values will be kept. Press the button and hold it down for two seconds to reset all
functions to zero, except ODOMETER.
replacement or storage of the unit.
TIME SPEED
12
DISTANCE
CALORIES
ODOMETER
SCAN
MODE
AAA Batteries

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wirk ride

Table of Contents