Rapid Heating; Setting The Time Functions; Timer; Cooking Time - Bosch Fornuis HGD745222N Instruction Manual

Set the temperature or grill setting using the temperature
2.
selector.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.

Setting the time functions

This oven has various time functions. The
the menu and moves through the different functions. The time
symbols remain lit up while settings are programmed. The
square brackets [ ] indicate the time function selected. You can
modify an already programmed time function directly with the
sensors or , provided the time symbol is situated between
@ A
square brackets [ ].

Timer

The timer works independently of the oven. The timer has its
own beep. This can be used to distinguish whether the time set
for the timer or the automatic oven shut-off have finished

(cooking time).

Press the button once 0
1.
The time symbols light up on the display panel, the square
brackets are next to .
U
Set the timer using the @
2.
Value suggested for the
Value suggested for the
The programmed time is shown after a few seconds. The time
set for the timer starts to count down. The symbol [
on the display panel and the timer's progress is shown. The
other time symbols switch off.
The time set for the timer has elapsed
A beep will sound. The display panel will show
off the timer using the
0
Changing the time on the timer.
Change the time set for the timer using the
new time is shown after a few seconds.
Cancelling the timer
Resetting the timer to :
‹‹
is shown after a few seconds. The timer switches off.
sensor activates
0
.
or A buttons.
button = 10 minutes.
@
button = 5 minutes.
A
U
:
‹‹ ‹‹
button.
or buttons. The
@ A
with the button . The new time
‹‹ A

Rapid heating

With the rapid heating function, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC. The following types of heating are appropriate:
3D hot air
■
Top and bottom heating
■
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Select the temperature and type of heating required.
1.
Briefly press the
2.
The display panel shows the
heat up.
End of rapid heating
A beep will sound. The
panel. Put the food in the oven.
Cancelling rapid heating
Press the
c
display panel.
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The symbol for the time
function in the foreground is in brackets.
To view the timer
the actual time
brackets are around the required symbol. The corresponding
value will be shown for a few seconds on the display panel.
Cooking time
The oven allows you to set the cooking time for each type of
food. The oven switches off automatically when the cooking
time has finished. This avoids interrupting other tasks to switch
the oven off or exceeding the cooking time by mistake.
Example in the picture: cooking time: 45 minutes.
Select the type of heating using the function control knob.
1.
Select the temperature or grill power level with the
2.
temperature control knob.
Press the
3.
The display panel will show
] lights up
up, the brackets are located next to
. Switch
<
%
button.
c
symbol. The oven will begin to
c
symbol disappears from the display
c
button. The symbol disappears from the
c
U , the cooking time
0 , press the 0 sensor repeatedly until the
button twice.
0
‹‹ : ‹‹ . The time symbols light
r , the end time p or
r .
15