Power Configuration - CDA HCN510 Manual For Installation, Use And Maintenance

Power configuration
This hob can be connected to a 13, 16, 25 or 32amp supply and configured to work on any of these power settings.
If the hob is connected to a 32amp supply all four zones can be used on the maximum setting with boost at the same time. If
however, the hob is connected and configured to a 13amp supply and all four zones are selected at the same time the hob will
limit the maximum power consumed so that the 2.8kW power supply cannot be exceeded.
To configure the hob (at first switch on)
1. Touch the to switch off the childlock.
2. Touch the and keys for the front left and right zones simultaneously
3. Touch the front left zone
Front left zone display
2
3
6
7
4. Touch the plus and minus keys for the front left and right zones simultaneously to confirm the setting.
All displays will show 8 and then switch off. The childlock will be switched back on automatically, and the hob is now configured
ready for use.
12
key to cycle through the options. The displays will show:
Timer display
PO
PO
PO
PO
Front right zone
display
8
5
0
2
Power Settings
2.8 kW
3.5 kW
6.0 kW
7.2 kW