Preparing The Machine Before Installing The Hoop; Attaching And Removing Embroidery Hoop - Singer XL-580 Instruction Manual

PREPARING THE MACHINE BEFORE
INSTALLING THE HOOP
needle comes to its highest position.
ATTACHING AND REMOVING
EMBROIDERY HOOP
under it.
To remove, pull the hoop forward to slide it out from
underneath the embroidery foot.
until it clicks into place.
To remove, press the release lever and slide the hoop
towards you.
NOTE: Before attaching small hoop or endless hoop, turn on
power switch to move the carriage to embroidering
standby position.
76
1
1
Carriage
2
Chariot
Carro
Placa de montaje de aro
Levier de retrait du cerceau.