Table of Contents
Advertisement
Available languages
Available languages
OK if no changes are desired,
Cancel to cancel the procedure and move
back to the Machine Navigator dialogue box,
upper and lower designs closer or further away, allowing
you to preview how you want your endless embroidery
designs to be positioned relative to one another when they
designs to be placed relative to one another as you sew
them, click OK.
5. Before you start to sew, deactivate the Thread Cutter
Mode
help prevent the thread from coming out of the needle
with sewing alignment stitches and long jump stitches.
Thread the top of the machine, and leave a thread tail
6. Press the Start/Stop button to embroider the endless
design. You will notice that the design starts first with a
right corners of the design area, before the main design
is stitched out. They are used to aid in repositioning the
of alignment stitches at the bottom left and bottom right of
the design.
Navigator'
been no changes or edits to the design after transmission
of data, there is no need to re-send the design to the
machine. The data is ready for the next repeat.
The 'Color Block List' should be displayed along the
bottom of the PC screen for easy reference regarding
down to 'Color Block List.'
of your selected design displayed at the bottom of your PC
screen.
8. Before releasing the hoop, press any one of the shift
move the needle to its original position.
120
'Machine
'Tools', then scroll
E
Left
Right
Up
Image 4
Color Block List
Image 4
Liste de Bloc de Couleur
Imagen 4
Lista de Bloque de Colores
Clear
Bas
Borrar
Advertisement
Table of Contents
