Maintenance; Clean The Product - Fluke 175 Calibration Information Manual

175, 177, 179
Calibration Information

Maintenance

To prevent possible electrical shock, fire, personal injury, or damage to the Product:

Repair the Product before use if the battery leaks.

Do not operate the Product with covers removed or the case open. Hazardous
voltage exposure is possible.

Remove the input signals before you clean the Product.

Use only specified replacement parts.

Have an approved technician repair the Product.

Use only specified replacement fuses.

Replace a blown fuse with exact replacement only for continued protection
against arc flash.

Clean the Product

To avoid electrical shock:

Remove test leads and any input signals before cleaning.

Do not reinstall the pca until it is completely dry.
Dirt or moisture in the terminals can affect readings.
To avoid damaging the Product:

Do not use aromatic hydrocarbons or chlorinated solvents for cleaning. These
solutions will react with the plastics used in the instruments.

Do not use detergents of any kind for cleaning the pca.
Clean the instrument case with a damp cloth and mild detergent.
The pca may be washed with isopropyl alcohol or hot deionized water and a soft brush. Remove excess
cleaning material with clean dry air at low pressure, then dry the pca at 50 C.
8
Figure 2. Battery and Fuse Replacement
 Warning
 Warning
 Caution
aik13f.eps