Smeg SAC106S Manual page 15

Secondary menu
The appliance also has a drop-down
secondary menu allowing the user to:
• Activate or deactivate the Child Lock.
• Activate or deactivate Showroom mode
(which disables all the heating elements
so that only the control panel works).
• Activate or deactivate Low Power mode.
With the appliance in Stand-By status
1. Press and hold the temperature knob
down for at least 5 seconds.
2. Turn the temperature knob right or left to
change the setting status (ON/OFF).
3. Press the temperature knob to move to
the next mode.
Child Lock mode: This mode allows the
appliance to automatically lock the controls
after one minute of normal operation
without any intervention from the user.
During normal operation it is indicated by
the indicator light coming on.
To temporarily release the lock during
cooking, hold the temperature knob down
for 5 seconds. One minute after the last
setting the lock will become active again.
Touching or varying the position of
the temperature and function
knobs, the display will show "bloc"
for two seconds.
Use
Showroom mode (for exhibitors only):
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
To use the appliance normally, set this
mode to OFF.
When Show Room mode is active,
"SHO" appears once a minute on
the display for 3 seconds.
Low Power mode: This mode allows the
appliance to limit the power used.
HI: normal power.
LO: low power.
Touching or varying the position of
the temperature and function
knobs, the display will show "bloc"
for two seconds.
17