Vapour Clean: Assisted Oven Cleaning - Smeg SAC106S Manual

4.9 Vapour Clean: assisted oven
cleaning
Vapour Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
Preliminary operations
Before starting the Vapour Clean function:
• Completely remove all accessories from
inside the oven. The upper guard can be
left inside the oven.
• Pour approx. 40 cc of water onto the
floor of the oven. Make sure it does not
overflow out of the cavity.
22
Cleaning and maintenance
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray against the side
walls, upwards, downwards and
towards the deflector.
• Close the door.
We recommend spraying approx.
20 times at the most.
Vapour Clean setting
1. Turn the function knob and the
temperature knob to the
2. Set a cooking time of 18 minutes using
the cooking time procedure described in
more detail in "Programmed cooking";
3. The Vapour Clean cycle starts
approximately 6 seconds after the last
pressure on the programmer's keys.
4. At the end of the Vapour Clean cycle, the
timer will deactivate the oven heating
symbol.