Smeg SAC106S Manual page 14

4. Press the temperature knob. The
indicator light flashes. Turn the knob right
or left to set the cooking end time.
5. After a few seconds the
indicator lights stop flashing. The
appliance waits for the set start time.
6. At the end of the cooking time STOP
appears on the display and a buzzer will
sound that can be deactivated by
pressing the temperature knob.
To extend the cooking time
manually, press the temperature
knob again. The appliance will
resume its normal operation with
the previously selected cooking
settings.
To switch the appliance off, turn the
function knob to 0.
For safety reasons, it is not possible
to set the cooking end time by itself
without setting the cooking
duration.
Modifying the data set during
programmed cooking
During operation, it is possible to modify
programmed cooking duration:
1. When the and
are steady and the appliance waits for
the cooking to start, press the
temperature knob. The
will start flashing.
16
Use
and
indicator lights
indicator light
2. Turn the temperature knob right or left to
alter the preset cooking time.
3. Press the temperature knob again. The
indicator light switches off and the
indicator light starts flashing. The
display shows the cooking end time.
4. Turn the temperature knob right or left to
delay the cooking end time.
5. After a few seconds the
indicator lights stop flashing and the
programmed cooking restarts its
operation with the new settings.
Timer
This function only activates the
buzzer, without stopping cooking.
1. Press the temperature knob. The display
shows
light flashes.
2. Turn the knob right or left to set the
duration (from 1 minute to 4 hours). After
a few seconds, the
stops flashing and the countdown starts.
3. Select the required cooking function and
wait for the buzzer to sound, indicating
that the cooking time is over.
4. Press the temperature knob to stop the
buzzer. The
5. Turn the knob right or left to select a
further timer.
and
and the indicator
indicator light
indicator light flashes.