Moving The Projector; Caution In Handling The Projector - Ask Proxima E1655 series User Manual

Moving the projector

Before use, remove the lens protector. To move the projector, press and
hold the Shift or lens key more than 5 seconds to center the lens back.
Then, install the protector to protect the lens.
When moving the projector, retract the adjustable feet to prevent damage to the lens and cabinet.
Put it into a suitable case when the projector is not in use for a long period.
Caution in moving or transporting the projector
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service in an unsuitable transport
case. This may cause damage to the projector. For information about transporting the projector by
courier or any other transport service, consult your dealer.
– Do not put the projector in a case before it is cooled enough.
When lifting or moving the projector, do not hold the lens
or the directive hood to prevent damage to the lens or the
unit.
Handle the projector with care. Do not drop or bump it to
avoid strong force, or place other objects on the cabinet.
Caution
The lens of the projector is electric.
When operating the projector, pay
attention to the following conditions.
When the lens is rotating, do not
touch it, otherwise your fingers may
get hurt.
Do not allow a child to touch the lens.
Caution on lens protector

Caution in handling the projector

6
Lens protector
Do not hold the lens and the peripheral part.
Safety guide