Standby Mode; Cooling Fast - Ask Proxima E1655 series User Manual

Standby mode

If you want to operate E1655 via the network, you can enable this function.
Normal: Even if E1655 is turned off, the network functions are still in active state. You can, through
the network, turn on or off the projector, change the network environment, and receive emails relating
to the projector at the time it is turned off.
Eco : Select this item when you don't need to operate E1655 through the network. Once
selected, the network function is disabled when E1655 is turned off.

Cooling Fast

After E1655 is powered off, you can use the tw o options below to operate the cooling fan:
ON: Normal running.
OFF: The fan runs more slowly and produces less noise, but needs more time
High land
E1655 can allow user to control the fan through Setting menu.
You can select the running speed of the fan according to the altitude of the location where E1655 is
installed.
OFF: Normal speed. If the site where E1655 is used is of low altitude, you can set this item as OFF.
ON 1 : The fan runs faster than normal speed. When E1655 is operated in places with high altitude
(2000m), the cooling fan will produce weaker effects. So, you should select this item.
ON 2 : The fan runs faster than "ON 1 ". When E1655 is operated in places with high altitude
(above 3000m), the cooling fan will produce weaker effects. So, you should select this item.
Lamp control
This item allows you to set the brightness of the screen.
Normal : The normal brightness.
Eco : Low brightness. It can reduce the power consumption and ensure the service life of the
lamp.
Auto : Brightness is adjusted according to the input signal.
Ceiling
With this function, E1655 can be inst alled to the ceiling to project images.
OFF: E1655 is in normal vertical position;
Auto : E1655 automatically identifi es its vertical or inverse state;
ON: E1655 is in inverse position.
Test pattern
This item allows you to set the internal signal of the system.
41
Setting