Basic Operation; Turning On The Projector - Ask Proxima E1655 series User Manual

Basic operation

Turning on the projector

Complete peripheral connections (with a computer, VCR, etc.) before
1
turning on the projector.
Connect the projector's AC power cord into an AC outlet. The
2
POWER indicator turns red. Open the lens cap.
Press the ON/STAND-BY button on the top control or on the remote
3
control. The POWER indicator becomes green and the cooling fans
start to operate. The preparation display appears on the screen and the
count down starts.
If the projector is locked with a PIN code, a PIN code Input Dialog
4
Box appears. Enter the PIN code as instructed below.
Note:

When the logo select is set to be "Off," the
logo will not be displayed on the screen.
When the Display function is set to be "Off," the logo
and countdown will not be displayed on the screen.
During the countdown period, all operations are
invalid except shutdown.
Enter a PIN code
Select a number by pressing the
and then press the
►
and move the cursor. The number changes to "*".
If you fixed an incorrect number, move the cursor
to the number you want to correct by pressing the
button, and then select the correct number by
◄
pressing the buttons.
▲▼
Repeat this step to complete entering a three-digit
number.
After entering the three-digit number, move the
cursor to "Set", then you can start to operate the
projector.
If you entered an incorrect PIN code, the "PIN
code" and the number (***) turn red. Enter the
correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a security code that
allows the person who knows it to operate the projector. Setting the
PIN code prevents unauthorized use of the projector.
A PIN code consists of a three-digit number. Refer to the PIN code
lock function in the Setting Menu on pages 46 for locking operation
of the projector with your PIN code.
buttons,
▲▼
button to fix the number
Move the cursor to Set, and press SELECT.
Caution on handling the PIN code
If you forget your PIN code, the projector
can no longer be started. Take a special
care in setting a new PIN code; write
down the number in a column on page 59
of this manual and keep it at hand. Should
the PIN code be missing or forgotten,
consult your dealer or service center.
19