Adjusting Image - Ask Proxima E1655 series User Manual

AV Input
Image adjust
1. Press F. Menu on the remote control to display the
on-screen menu. Press
image adjustment. Then press
2. Press ▲▼ to select the item to be adjusted, and then
press ◄► to set the value or
the adjustment dialogue box will appear. Press ◄►
to set the value.
Contrast
Press ◄ to decrease the contrast and press ►to increase
it.
Brightness
Press ◄ to decrease the brightness and press ►to
increase it.
Color
Press ◄ to decrease the color gamut and press ►to
increase it.
Tint
Press ◄► to select the appropriate tone for the image.
White balance (Red)
Press ◄ to make the red color lighter and press ►to
make it stronger.
White balance (Green)
Press ◄ to make the green color lighter and press ►to
make it stronger.
White balance (Blue)
Press ◄ to make the blue color lighter and press ►to
make it stronger.
Sharpness
Press ◄ to soften the image and press ► to sharpen it.
Gamma
Press ◄► to adjust the grey level to achieve better
contrast and balance.
Noise reduction
Enable this item to reduce the snow interference and
achieve more smooth and clear image.
Progressive
The interlaced video signal can be converted into images
in a progressive manner. You can select one from the
options below:
OFF: Disabled;
L1: Projecting dynamic image;
L2: Projecting still image;
Film: This item is used for watching films. When
it is selected, E1655 will restore the images with hig
quality to reduce image distortion.
to select the icon for
or press Select.
▼
press Select. At the time,
h
38
Menu for adjusting image