Ford TOURNEO CONNECT 2015 Owner's Manual page 235

1. Make sure the Bluetooth feature on
your cell phone is switched on before
starting the search. Refer to your
device's manual if necessary.
2. Press the PHONE button.
3. Select the option for Bluetooth devices.
4. Press the OK button.
5. Select the option to add. This starts
the pairing process.
6. When a message to begin pairing
appears in the audio display, search for
SYNC on your device to start the
pairing process.
Command
call (someone | [[a]
name])
Call <name> at home
Call <name> at work
Call <name> in office
Call <name> on cell
Call <name> on other
dial [[a] number]
([go to] privacy [on] |
transfer to phone |
handsfree off)
(hold call [on] | (put |
place) call on hold)
(hold call off | take call
off hold)
mute [call] [on]
(mute [call] off | Unmute
[call])
join (call | calls)
Tourneo Connect (CHC) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, Long Wheelbase Kombi/Short Wheelbase Kombi, Base/Base High Payload/Titanium/Titanium Hig
SYNC
7.
The system may prompt you with
questions such as setting the current cell
phone as the primary cell phone,
downloading your phonebook, etc.
Cell Phone Voice Commands
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
You do not need to say "phone" prior to these commands.
These commands are only available during a call.
These commands are only available during a call.
These commands are only available during a call.
These commands are only available during a call.
These commands are only available during a call.
These commands are only available during a call.
233
When prompted on your cell phone's
display, enter the six-digit PIN provided
by the system in the audio display. The
display indicates when the pairing is
successful.
Press the voice button and when
prompted say either:
Action