Ford TOURNEO CONNECT 2015 Owner's Manual page 198

Table of Contents

Advertisement

WARNINGS
Set up a warning triangle.
Make sure that your vehicle is on firm,
level ground with the wheels pointing
straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave your
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Do not work underneath your vehicle
when it is supported only by a jack.
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
1.
Install the locking lug nut key.
2. Slacken the lug nuts.
Tourneo Connect (CHC) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, Long Wheelbase Kombi/Short Wheelbase Kombi, Base/Base High Payload/Titanium/Titanium High Payl
Wheels and Tires
3. Jack up your vehicle until the tire is
4. Remove the lug nuts and the wheel.
Note: Do not lay alloy wheels face down
on the ground, this will damage the paint.
Installing a Road Wheel
moving forward. If you have to fit a spare
wheel with the arrows pointing in the
opposite direction, have the tire refitted in
the correct direction by an authorized
dealer.
the National Type Approval invalid. See
Technical Specifications (page 197).
more details about compatibility.
supplied for your vehicle. If in doubt see an
authorized dealer.
nuts. This can cause the lug nuts to loosen
while driving.
196
clear of the ground.
WARNINGS
Make sure that the arrows on
directional tires point in the direction
of rotation when your vehicle is
Use only approved wheel and tire
sizes. Using other sizes could
damage your vehicle and will make
Do not fit run flat tires on vehicles
that were not originally fitted with
them. See an authorized dealer for
WARNINGS
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Lug nuts are subject to change. You
must make sure that you use only
the specific lug nuts and wheels
Make sure there is no lubrication
(grease or oil) on the threads or the
surface between the wheel lugs and

Advertisement

Table of Contents
loading

Table of Contents